Milano / 75

75/Milano parts All models. 



Milano / 75

There are 133 products.

Showing 1-12 of 133 item(s)

Active filters

Aluminum Radiator,...

<p>These are the best quality radiators you will find. I have searched far and wide for the best quality, workmanship to reduce any problems with the product. This radiator is not made by just some radiator guy, they where designed by an degreed engineers and alfissimo. Each radiator is designed using CAD design and CNC sheet metal cutting is used that can hold .005" tolerance with complete repeatability, so each radiator is exactly like the previous one and fit is perfect every time. Metal grain is aligned during flat pattern CAD layout to insure maximum strength at bends. This uses a lot more sheet stock and is costly, but again, this is where these radiators come in above the rest. Furnace brazed cores insure leak free service for years and eliminates the need for epoxy, and aggressive fin counts for the application assure maximum cooling. High fin counts are more expensive, and are therefore not used widely in the industry, But I have opted for more fins in the design for the best cooling possible. Each core is annealed, and the tubes are welded seam, rather than brazed lock seams. The fins are multi-louvered for enhanced air turbulence to maximize heat rejection. Each weld is show car quality, with consistent bead width, dab spacing and penetration.</p> <p>I have asked to not skimp on anything with this radiator. I have worked closely with the builder to assure that these will be problem free radiators, awesome performance and Easy fit. These are all built for us where we can make sure all radiators are tested and done right Drop in fit design. These are worth every penny. They are built by hand with the best materials available. No Chinese cores here. These are built to last a long time and keep your Alfa on the road looking and running cool. </p> <p><strong>*Can take up to 4-6 weeks to build</strong></p> <p><strong> </strong><br /><strong>Dimensions</strong></p> <p>23" wide, 16 1/4" tall, 2 3/4" thick, inlet top left 1 1/2" dia, outlet bottom right, 1 1/2" dia, M22X1.5 threaded boss just below lower outlet, 4 mounting bosses on engine side and a 5/16 tube top right, with mounting pins on bottom</p> <p></p> <p></p>
Price $1,125.00

A/C Condenser, Alfissimo's...

<ul><li>Coming soon...Milano's have been known for thier bad A/C systems. The serpentine condensor used on the Milano OE condensor is old and out of date and very inefficient. This newer up to date Aluminum condensor will remove heat much better than stock due to the design of the fins and tubing. Old style condensers made of copper use a solder that acts as a heat sink. You can expect a proven 35-40%+ improvement over stock condensor which means cooler temps in the cabin.</li> <li>Our P-flow condenser has more fins per square inch than OE which means more heat removal which equals less pressure on the high side and less work for the compressor.</li> <li>Also available soon, lower temp thermostat for compressor, turns compressor off a few degrees cooler than stock to produce cooler cabin temps.</li> <li>Also available Larger Aluminum radiator, stock radiator is too small and uses old technology like the A/C condensor. It uses plastic tanks and serpentine style.</li> <li>AVAILABLE FOR: 164 , SIPDER and GTV6</li> </ul><strong><i>N.B. The new header and condenser are amazing......My car has a deep rumble which is is not too loud........a/c is Ice! Thanks ......Dominic S. </i></strong>
Price $250.00

Steering Rack, 75/Milano...

<p>Fits 1all Milano's Fits 164S, 164Q Remanufactured to the Highest quality and OE spec. There are many inexpensive Remanufactured steering racks available by other companies. This companies doe not do the extensive rebuild of the rack that we do which includes honing the shaft. They just replace a few seals and call it a Remanufactured rack. We go through and replace everything. This is one reason why we can stand by our 36 MONTH warranty. Don't settle for less!! Some customers are on their 6-7 year with out steering racks. Non-teflon main seals used which means no leaking. </p> <p></p> <p><b>Lifetime warranty</b></p> <p></p> <p><span style="text-decoration:underline;">$200.00 Core charge <strong>(*charged at time of order under Handling charge total)</strong></span></p> <p>Must be returned within 30 days for refund of core Shipping includes return label for Core Must be returned within 30 days for refund of core charge Exchange of Identical units ONLY, no bent or broken units</p> <p>Returns on racks are not accepted after install, only warranty available. </p>
Price $650.00


<h1>Performance Header for 3.0L Milano.</h1> <p>~16-Hp gain, alone with cat system Made in Germany high grade Stainless steel/ Chromed TUV &amp; ISO 9000 approved</p> <p></p> <p>*Special Order, made to order, 1-4 weeks</p>
Price $1,125.00